Canon LBP6230dw Manual page 151

[System Manager Information]
Specify the PIN and other system manager information.
[Device Information]
[Device Name]
Enter up to 32 alphanumeric characters for the name of the machine.
[Location]
Enter up to 32 alphanumeric characters for the location of the machine.
[Support Link]
Enter a link to support information about the machine. The link can be up to 128 alphanumeric characters long.
The link is displayed on the Portal Page (main page) of the Remote UI.
Security Settings
Enable or disable encrypted communication via SSL and IP address packet filtering.
Remote UI Settings
Select whether to use SSL encrypted communication.
Use SSL
Off
On
Key and Certificate Settings
Register key pairs, or generate them on the machine. You can check and verify registered key pairs.
Key Pairs and Digital Certificates
CA Certificate Settings
Register a CA certificate. One CA certificate is preinstalled. You can check and verify registered CA certificates.
Settings for Key Pairs and Digital Certificates
IP Address Filter
Specify whether to allow or reject packets sent to or received from devices with specified IP addresses.
IPv4 Address: Outbound Filter
Do not allow the machine to send data to a computer with a specified IPv4 address.
Rules
Downloaded from ManualsPrinter.com Manuals
Setting System Manager Passwords
Enabling SSL Encrypted Communication for the Remote UI
Configuring Settings for
Configuring
Specifying IP Addresses for Firewall