Canon LBP6230dw Manual page 149

Use Daylight Saving Time
Off
On
Start
January to March
1st to Last
Monday to Sunday
End
January to October to December
1st to Last
Monday to Sunday
Auto Sleep Time
Off
After 1 minute
After 5 minutes
After 10 minutes
After 15 minutes
After 30 minutes
After 60 minutes
After 90 minutes
After 120 minutes
After 150 minutes
After 180 minutes
Auto Shutdown Time
Off
After 1 hour
After 2 hours
After 3 hours
After 4 hours
After 5 hours
After 6 hours
After 7 hours
After 8 hours
Log on to the Remote UI (
Item settings
[Time Zone]
Set the time zone of the region where the machine will be used.
UTC
Coordinated Universal Time (UTC) is the primary time standard by which the world regulates clocks and time. The correct
UTC time zone setting is required for Internet communications.
[Use Daylight Saving Time]
Enable or disable daylight saving time. If daylight saving time is enabled, specify the dates from which and to which
daylight saving time is in effect.
[Auto Sleep Time]
The machine enters sleep mode automatically when it remains idle for a certain length of time. Specify the length of time
until the machine enters auto sleep. We recommend using the factory default settings to save the most power.
Sleep Mode
[Auto Shutdown Time]
You can set up the machine to automatically turn itself OFF after it remains idle for a certain length of time. This prevents
wasted power consumption caused by forgetting to turn the machine OFF. Specify the length of time until the machine
turns itself OFF.
Downloaded from ManualsPrinter.com Manuals
to December
Starting the Remote UI)
[OK]
Setting Auto Shutdown
[Settings/Registration] [Timer Settings] [Edit]
Setting