Setting IPv4 Address
1
Start the Remote UI and log on in System Manager Mode.
2
Click [Settings/Registration].
3
Click [Network Settings]
4
Click [Edit] in [IPv4 Settings].
5
Set the IP address.
Downloaded from ManualsPrinter.com Manuals
The machine's IPv4 address can be either assigned automatically by a dynamic IP addressing protocol, such as
DHCP, or entered manually. When connecting the machine to a wired LAN, make sure that the connectors of
the LAN cable are firmly inserted into the ports (
[TCP/IP Settings].
Connecting to a Wired LAN).
Starting the Remote UI
0JFC-01S