Table of Contents
Advertisement
2.6 USB Connector
The USB connector is used for connecting any device that conforms to the
USB interface. Many recent digital devices conform to this standard. The
USB interface supports Plug and Play, which enables you to connect or
disconnect a device whenever you want, without turning off the computer.
The UNO-3072LA provides four connectors of USB interfaces. The USB
interface complies with USB UHCI, Rev. 2.0 compliant. The USB inter-
face can be disabled in the system BIOS setup. Please refer to Appendix
A.8 for its pin assignments.
2.7 DVI-I Display Connector
The UNO-3072LA provides one DVI-I interface, powered by Intel
945GSE GMCH/ Intel GMA 950 accelerator. It integrates both analog
and digital video signal. This supports high-speed, high-resolution digital
display and traditional analog display. You could link your DVI or VGA
monitor through DVI-I to DVI and VGA cable (Advantech P/N:
1700004713). As for detail DVI-I pin assigmnet, please refer A.9 and
A.10.
2.7.1 VGA Support and Hotkey
UNO-3072LA support VGA interface: CRT mode: 1280 x 1024 @ 32bpp
(60Hz), 1024 x 768 @ 32bpp (85Hz) and supports 8 MB frame buffer
with system memory. You can set the hotkey and other configuration for
the VGA Graphics.
19
Chapter 2
Advertisement
Table of Contents
