Front Bezel - HP xw4550 Service And Technical Reference Manual

3. Pull up on the latch (1), slide the side access panel toward the rear of the workstation and then lift
off the cover (2).
Figure 4-5
To reinstall the side access panel, align the bottom groove of the side access panel with the bottom
edge of the chassis, and move the top of the side access panel toward the chassis until the panel aligns
with chassis sides. Continue to press firmly until the latch engages.

Front Bezel

1. Lift up on the two release snaps (1) located on the front bezel.
2. Rotate the front bezel away (2) from the chassis to remove the bezel.
Figure 4-6
To replace the front bezel, align front bezel on the bottom and rotate in until it snaps into place.
ENWW
Opening the side access panel
Opening the front bezel
Steps for removing and replacing components 63