Solid-State Drive (Ssd) - HP EliteBook 740 G1 Maintenance And Service Manual

Solid-state drive (SSD)

Description
512-GB
256-GB, Self-encrypting drive (SED), SSD
256-GB, Self-encrypting drive (SED), OPAL
256-GB
256-GB, locked (for use only in HP EliteBook 740/840 and ZBook 14 models)
256-GB, Self-encrypting drive (SED), locked
256-GB, locked, SMSG
240-GB
180-GB
180-GB, Self-encrypting drive (SED)
128-GB, SSD (for use only in HP EliteBook 750/850 models)
128-GB, locked (for use only in HP EliteBook 740/840 and ZBook 14 models)
128-GB, locked, SanDisk
120-GB, SSD
120-GB, M.2 (for use only in HP EliteBook 750/850)
32-GB, SSD
Before removing the solid-state drive module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the service cover (see
5. Disconnect the battery.
Remove the solid-state drive:
1. Remove the Phillips PM2.0×3.0 screw (1) that secures the drive to the computer.
56 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Service cover on page 51).
Spare part number
752240-001
731194-001
766013-001
766643-001
780090-001
799300-001
800584-001
732680-001
732678-001
786173-001
744483-001
766678-001
795941-001
732681-001
786035-001
743008-001