Table of Contents
Advertisement
Base enclosure (HP EliteBook 850 models)
Description
Base enclosure for use only on HP EliteBook 750/850 models (includes RJ-45 door with spring)
Base enclosure for use only on HP EliteBook 750/850 models, ESD (includes RJ-45 door with spring)
Before removing the base enclosure, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the following components:
a.
Service cover (see
b.
Battery (see
c.
Keyboard (see
Use the following image as an overview of all base enclosure screw locations.
Remove the base enclosure:
1.
Position the computer upside down.
76
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Service cover on page
Battery on page
53)
Keyboard on page
65)
51)
Spare part number
730813-001
765811-001
Hide quick links:
Advertisement
Table of Contents
