Card Reader Board - HP EliteBook 740 G1 Maintenance And Service Manual

Card reader board

Description
Card reader board for use in HP EliteBook 740/840/HP ZBook 14 models
Card reader board for use in HP EliteBook 750/850 models
Before removing the card reader board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the following components:
a. Service cover (see
b. Battery (see
c. Fan (see
d. Keyboard (see
e. Base enclosure (see
Remove the card reader board:
1. Disconnect the larger card reader cable (1) and the smaller touchpad cable (2) from the the card reader
board.
2. Using a thin tool, pry up the left side of the board to disengage it from the top cover (3).
3. Remove the card reader board (4).
80 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Service cover on page
Battery on page 53)
Fan on page 79)
Keyboard on page 65)
Base enclosure on page
51)
73)
Spare part number
730955-001
730821-001