Table of Contents
Advertisement
2.
Release the wireless antenna cables (2) from the routing channel attached to the system board.
3.
Remove the four Torx TM2.5×6.0 screws (1) that secure the display panel to the computer.
4.
Rotate the display hinges upward to an angle (2) until the top cover is free for removal.
5.
Separate the display from the top cover (3).
6.
If you need to remove the bezel, lift to disengage the bezel on the bottom (1), left and right sides (2),
and top (3).
Component replacement procedures
99
Hide quick links:
Advertisement
Table of Contents
