Wlan Module - HP EliteBook 740 G1 Maintenance And Service Manual

WLAN module

Description
Intel Dual Band Wireless-AC 7260 802.11 ac 2x2 WiFi + BT 4.0
Intel Dual Band Wireless-N 7260AN 802.11 a/b/g/n 2x2 WiFi + BT4.0
Intel Dual Band Wireless-N 7260NB 802.11 a/b/g/n 2x2 WiFi + BT4.0
Broadcom BCM943228HMB 802.11abgn 2x2 Wi-Fi + BT 4.0 Combo Adapter
Intel Wireless-N 7260BN 802.11 b/g/n 2×2 WiFi + BT 4.0 combo adapter
Intel Dual Band Wireless-N 7260AN 802.11 a/b/g/n 2x2 WiFi + BT4.0 (for use in Indonesia)
CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module
authorized for use in the computer by the governmental agency that regulates wireless devices in your
country or region. If you replace the module and then receive a warning message, remove the module to
restore device functionality, and then contact technical support.
Before removing the WLAN module, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the service cover (see
5. Disconnect the battery.
Remove the WLAN module:
1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.
NOTE:
"1". The WLAN antenna cable labeled "2" connects to the WLAN module "Aux" terminal labeled "2". If
the computer is equipped with an 802.11a/b/g/n WLAN module, the yellow WLAN antenna cable
connects to the middle terminal on the WLAN module.
2. Remove the two Phillips PM2.0×3.0 screws (2) that secure the WLAN module to the base enclosure.
(The WLAN module tilts up.)
Service cover on page
The WLAN antenna cable labeled "1" connects to the WLAN module "Main" terminal labeled
51).
Component replacement procedures
Spare part number
710661-001
717381-001
717382-001
697316-001
717384-001
747832-001
63