Table of Contents
Advertisement
13.
If you need to remove the display hinges, remove the six broadhead Phillips PM 2.0×2.0 screws (1), and
then lift the hinges from the display enclosure (2).
Display hinges are available using spare part number 730957-001 for HP EliteBook 740/840 models,
737660-001 for HP ZBook 14 models, and 730819-001 for HP EliteBook 750/850 models.
14.
If you need to remove the display cable, lift the cable straight up and out of the display enclosure. Use
the following image to properly route the cable.
15.
If you need to replace the WLAN antenna cables and transceivers:
a.
Release the antenna cables from the clips (1) and routing channel built into the display enclosure.
Component replacement procedures 103
Hide quick links:
Advertisement
Table of Contents
