Elation Design Wash 300E Manual page 32

Hide thumbs Also See for Design Wash 300E:
Table of Contents

Advertisement

 Reset Pan and Tilt: This function will only reset the pan and tilt motors to the home
position.
 Reset Colors: This function will only reset the color wheel to the home position.
 Reset Shutter: This function will only reset the blackout shutter to the home position.
 Reset Others: This function will reset all other motors not associated with any in the
previously listed reset commands to the home position.
9.6 Effect Adjust:
 Test Channel – This menu function allows the user to select each individual
fixture channel and test it's function independently from the control board.
 Lamp adjustment (manual control) – This function readies the fixture for lamp
optimization in a simple single step procedure. This function will center the pan and
tilt motors and at the same time open the shutter and bring the dimmer to 100%. The
pan and tilt function will still operate if the fixture needs to be positioned to a flat clear
surface. For more information on lamp optimization please see Section 6/Page 13.
9.7 Calibrate values – This function should only be performed by a technician familiar with
the operations of fixtures of this type. This function allows a user to make small
adjustments to the effect wheels (color, shutter, etc) to compensate for wear or in the
event a sensor has been knocked slightly out of place. Because improper use of this
function can result in undesired operation this function has been password protected.
The password is 050 and must be entered each time the calibration menu function is
entered. Because calibration is an extremely delicate procedure instruction on
performing this action are left out of this manual. For a first time calibrator, please
contact our customer support team for step-by-step instructions.
9.8 User Mode Set: This function allows the user to create user defined channel orders
allowing the fixture to match the channel order of other fixtures on the market for
easier operation. A total of three user modes may be configured:
©Elation Professional, Los Angeles Ca.
32
Design Wash 300E™
www.ElationLighting.com

Advertisement

Table of Contents
loading

Table of Contents