Elation Design Wash 300E Manual page 31

9.4.3 Fans Control - This function is used to change the functionality of the internal
cooling fans. The available selections are: 1) "AUTO" – The fans will automatically
switch between low and high speeds depending on the internal operating temperature. 2)
"HIGH" – The fans will run in high-speed mode regardless of operating temperature. 3)
"LOW" – The fans will remain in low speeds regardless of internal operating
temperature.
9.4.4 Display Settings – The display is designed to turn off during normal operation to
avoid excessive light in situations that require an extremely dark environment. This
function will adjust the time delay the LCD will remain on before it turns off. This function
is disabled as default.
9.4.5 Temperature C/F – This function changes the temperature the unit will display
from either Celsius or Fahrenheit. Celsius is set as default.
9.4.6 Initial effect – This function allows a user to create and assign a custom "Home
Position." Adjusting the Pan and Tilt values then locking those values into the fixture's
internal memory creates the new "Home" position. This setting can be erased by
restoring the fixture's factory values.
9.4.7 Restore Default – This function is used to restore the factory settings of the
device. All settings will be set back to the default values (shaded). Any edited scenes will
be lost.
9.5 Reset Functions: The reset function returns a motor to the "Home" position. There are
several reset functions available on this fixture. The list below details the functionality of
each available selection.
 Reset All: This function will reset all internal motors to the home position.
©Elation Professional, Los Angeles Ca. 31
Design Wash 300E™
www.ElationLighting.com