Fixture Menu - Elation Design Wash 300E Manual

9. FIXTURE MENU

On-Board System Menu: The Design Wash 300E
menu. This next section will detail the functions of each command in the system menu.
LCD Control Panel: The control panel located on the base of the fixture allows you to
access the main menu and make all necessary adjustments to the Design Wash 300E™.
During normal operation, tapping the "MODE/ESC" key once will access the fixture's main
menu. Once in the main menu you can navigate through the different functions and access
the sub-menus with the Up and Down buttons. Once you reach a field that requires
adjusting, tap the ENTER button to activate that field and use the UP and Down button to
adjust the field. Tapping the Enter button once more will confirm your setting. Once a setting
is saved the display will briefly readout OK to confirm a new setting has been made and
locked into memory. You may exit the main menu at any time without making any
adjustments by tapping the MODE/ESC button.
MODE/ESC Button - To access the main menu locate the MODE/ESC button on the front of
the unit. Press this button to activate the system menu. Tap the UP button until you reach
the function you wish to change. When you reach the function you wish to change tap the
ENTER button once to select that menu function. When a function is selected use either the
UP or DOWN buttons to change the function. Once your changes are made tap the ENTER
button yet again to lock the change in the system menu. To exit without making any changes
tap the MODE/ESC button.
Default settings shaded.
Set DMX Address
Value Display
Set To Slave
Auto Program
Music Control
©Elation Professional, Los Angeles Ca.
A001~AXXX
PAN...
Slave1, Slave2, Slave3
Master / Alone
Master / Alone
22
™
comes with an easy to navigate system
DMX address setting
DMX value display
Slave setting
Auto program
Music control
www.ElationLighting.com
Design Wash 300E™