Table of Contents
Advertisement
Test Channel
Manual Control
Calibrate Values
User Mode
Edit User Mode
Select
Programs
Edit Program
Edit Scenes
Rec. Controller
9.1 Function Mode:
9.1.1
"Set DMX Address" - DMX address setting – This function is used to set or
adjust the fixture's starting DMX address. Every device controlled by DMX has to have a
unique starting address. The addressing feature is what allows DMX to function
properly. The DMX address of a fixture is what allows it to communicate with a controller
properly. The DMX addressing also allows the fixture to ignore any DMX information
coming from the controller that is not meant specifically for the fixture. Because each
fixture is connected in a daisy-chain fashion it is imperative to assign a proper and
unique starting DMX address to each and every fixture. The DMX address is
non-destructive and will remain in the fixture's memory even when the power to the unit
is switched off. Memory is backed-up and retain by an internal power source that should
last about five years. For proper DMX addressing see Section 10/Page 34 of this user
manual.
9.1.2
"Value Display" - Display the DMX 512 value of each channel
With this function you can display the DMX 512 value of each channel. The display will
©Elation Professional, Los Angeles Ca.
PAN ......
PAN
--Password--
Color wheel
:
XXXXXX (Band)
User Mode A
User Mode B
User Mode C
PAN
PAN = CH01
:
:
Auto Pro Part 1
Program 1 ~ 10 Program 1
Auto Pro Part 2
Program 1 ~ 10 Program 2
Auto Pro Part 3
Program 1 ~ 10 Program 3
Program 1
Program Test
:
Step 01=SCxxx
Program 10
Step 64=SCxxx
Edit Scene 001
Pan, Tilt,...
~ Edit Scene
--Scene Time--
250
Input
Outside
XX~XX
PAN =XXX
Password=XXX
Color wheel=XXX
:
("STEP
XX")
Pan=xxx
TIME=xx.xs
By
24
Design Wash 300E™
Test function
Fine adjustment of the lamp
Calibrate and adjust the
effects
to
standard/right
position. Password "050"
User selectable operating
modes.
Allows
channels
assignment to be modified
Preset User modes
Select programs to be run
Testing program
Program in loop
Save and exit
Save and automatically
return
Manual scenes edit
Automat. scenes rec
www.ElationLighting.com
Advertisement
Table of Contents
