Elation Design Wash 300E Manual page 33

 User mode A
 User Mode B
 User Mode C
 Edit User mode – This function allows the user to make the actual changes in the
user-defined modes that are created in the previous function.
9.9 EDIT PROGRAM: - The fixture comes equipped with a built-in DMX recorder that allows
custom programs to be installed and recalled directly from the fixture's control board.
Programs can be created and stored using the fixture's control board or by using an
external DMX controller. For detailed instructions on how to complete this task please
see Section 12/ Page 38.
 Select program – This function allows the user to select one of ten of the user
defined built-in programs. This program is then accessed in "Function Mode" under
"Program Run."
 Edit program – This function allows the user to edit the built-in programs.
 Edit Scenes – This function allows the user to edit or define the actual scenes that
are stored in the user defined built-in programs that are accessed in the previous
step.
 Rec Controller - The Design Wash 300E
Pre-programmed scenes can be transmitted to the fixture via any DMX compliant
controller. This function allows those scenes to be stored in to the fixture's built-in
memory and then subsequently used to create the user-defined programs.
©Elation Professional, Los Angeles Ca.
™
features an integrated DMX recorder.
33
Design Wash 300E™
www.ElationLighting.com