Tektron ME901 Operation Manual page 69

7 Auto/manual switch
8 Power Cord
9 Direction Switch
7.3 Operation Description
7.3.1 Install Paper Core
Install paper core, stick a double side adhesive in horizontal on the surface of the paper core.
7.3.2 Pull the media to paper core equably, slight press the media and stick it on paper core.
ME ME ME ME Series Series Printer Printer Operation Operation Manual
Series Series Printer Printer Operation Operation
The switch used to transfer the control system by manual or by sensor
to auto control
This is the power card for taking up system.
This is used to change the winding direction.
- 68 -
Manual
Manual Manual