Turn On Pinter - Tektron ME901 Operation Manual

2.7.5 Install and fix damper holder after all dampers are connected with the head correctly.
2.8 Turn On Printer
2.8.1 Choose correct power supply
1) Power supply required:
Printer：AC 220V/50Hz or AC 110V/60Hz; Heater：AC 220V/50Hz or AC 110V/60Hz ;
PC： as per the instruction on PC
The printer requires good grounding.
Please use correct power supply as per the requirement otherwise may damage the equipment.
2) Please remove any un-necessary remains in the printer before switch on power.
3) Connect printer and heater to power supply by two power cords.
2.8.2 Booting printer and self checking
Note: Please move the carriage and check the gap between the head and printing plate by manually.
Make sure there is no substance on the platen. Make sure there is no problem for carriage move freely.
1）Turn on the machine by push main power switch. The printer starts self booting for checking the status of the
machine. The carriage would move back to home position after checking.
2）The printer will be online after booting.
ME ME ME ME Series Series Printer Printer Operation Operation Manual
Series Series Printer Printer Operation Operation
- 27 -
Manual
Manual Manual