Tektron ME901 Operation Manual page 37

Media_End
Load_Default
About...
Motion_Test
Engr_Mode
(Press OK
key, enter
the
password
98766, press
Print_Width
OK key to
enable this
feature)
PurgePosiyion
Voltage_Adj
ME ME ME ME Series Series Printer
Series Series
This is the function to detect the media usability.
detected, the system will alarm and pause the printer. ( this function is no
available on this model).
Lighten this item, press OK to confirm. Use Up or Down key to enable or
disable the function.
The default is Disable.
This makes all parameter back to default setting.
Lighten this item, press OK to confirm. Use Up or Down key to choose the
action. "No" indicates to keep the current setting. "Yes" indicates
re-set the parameter to default.
Press OK key again to execute the action.
Lighten this item, press OK to confirm.
reversion and memory size
Lighten this item, press OK to confirm.
and right and repeat.
This is used for carriage moving test.
Lighten this item, press OK to confirm.
printing speed. Use Up or Down key to choose mode, use Left and right key
to change the value. The bigger number indicates the carriage moves
Speed faster.
9 is the default value of Prod mode
6 is default number of Fine mode.
Press OK key to confirm the setting and back.
This function is used to set up maximum printing width of the printer.
Lighten this item, press OK to confirm, press Left key to move the carriage
to left side until the carriage is 10mm away from the mechanical limit,
press OK again to save the value. The carriage will move back to home
position, the display back to previous Manu.
Note: the new data will be in effective after restart the printer.
This is used to define the position of head purge.
Lighten this item, press OK to confirm, the carriage will move to flushing
position.
Use Left and Right key to move the carriage. Make sure the head is in the
right position above head capper.
Press OK to save the value, the carriage will move to capping position.
This function is used to change head firing voltage. Please be noted that
Printer Operation Operation Manual Manual
Printer Printer Operation Operation Manual Manual
- 36 -
When the media end is
The display will show firmware
The carriage starts moving left
This is used to set up the value of
to