Install Print-Head - Tektron ME901 Operation Manual

2.6 Install Print-Head

2.6.1 Connect flat cables to print head. Make sure the cable are in the right direction. See below fig.
The blue color of two cables have to be faced each other. Recommend to use same width
paper to cover the connector to avoid circuit short by sprayed ink
2.6.2 Use two M3X6 Hex screws to fix print head on holding plate. See the fig below
ME ME ME ME Series Series Printer Printer Operation Operation Manual
Series Series Printer Printer Operation Operation
- 23 -
Manual
Manual Manual
3 fixing holes