Chapter 6 Media Heating System; Introduction - Tektron ME901 Operation Manual

6.1 Introduction

The media heating system is an independent system, witch includes front, rear heater, and printing platen heater.
The user can choose the heater for particular media to achieve the best printing results.
6.2 Operation Diagram
6.3 Features
The front and rear heater are constant temperature controlled.
The printing platen heater's temperature is controlled by a separate PID controller. The user can set the
temperature as required.
All of the heater has a over heating protection for 70 ˚C.
temperature occurs. It can be recovered while the temperature is down.
The input voltage is selectable for 110V AC or 220VAC.
ME ME ME ME Series Series Printer Printer Operation
Series Series Printer Printer

Chapter 6 Media Heating System

Fig 6-1 Heating System Diagram
- 63 -
Operation Manual Manual
Operation Operation Manual Manual
the power will be switched off while over