Tektron ME901 Operation Manual page 14

Item # Description
1 Syncro Timing Belt
2 Press Roll
3 Pinch Roll
4 Printing Platen
5 Media Edge Guide
6 Front Media Guide
7 Linear Rail
8 Encoding Strip
9 Encoding Strip Shield
10 Cable Chain
1 2
Item # Description
1
Power Cord Socket
2 Heater controller
3 Main Power Switch
4 Front Media Guide heater
switch
5 Printing Platen heater switch
6 Rear Media Guide heater
switch
7 USB Port
8 M main ink tank
9 Y main ink tank
10 C main ink tank
11 K main ink tank
ME ME ME ME Series Series Printer Printer Operation
Series Series Printer Printer
Function
This is the belt for driving the carriage moving.
This is the roller to press the media touching the pinch roll firmly.
This is pinch roll for driving the media moving.
This is the plate for supporting the media while printing.
This is the guide to prevent media edge rising and touch the head.
This is the guide for media exiting and drying out after printing.
This is the guide for carriage movement.
This is used for jetted dots allocating in scan direction.
This is a cover for protecting encoding strip.
This is the chain for holding cables and ink tubes.
3 4 5 6
Function
This is the socket for supplying electrical power from the power
source.
This is a digital controller for control the Printing Platen temperature
This is main switch for turn on & off the printer
This is a switch for turn on & off the front Media Guide heater
This is a switch for turn on & off the printing Platen heater
This is a switch for turn on & off the rear Media Guide heater
This is used for connecting the cable for communication and data
transfer between printer and PC.
This is a ink tank for contain the M color ink. Double 220ML
This is a ink tank for contain the Y color ink. Double 220ML
This is a ink tank for contain the C color ink. Double 220ML
This is a ink tank for contain the K color ink. Double 220ML
Operation Manual Manual
Operation Operation Manual Manual
7
- 13 -
8 9 10 11