Safety Precautions - Tektron ME901 Operation Manual

Safety precautions

To ensure the safe and correct use of your printer, be sure to observe the following points.
Installation precautions
WARNING
Do not install the printer in the vicinity of volatile solvents such as alcohol or thinner。 。 。 。
A volatile solvent coming into contact with any of internal electrical components may
result in a fire hazard or electric shock.
Do not place objects such as those listed below on top of the printer.
Objects such as these coming into contact with any of internal electrical components
may result in a fire hazard or electric shock..
·Metallic objects such as necklaces.
·Objects such as glasses, vases, houseplants, etc. that contain water or other fluids.
CAUTION
Do not use the printer in an unstable location such as on a slope or a location
that is subject to a lot of vibration.
Such locations may cause the printer to tip over and cause injuries.
Do not place heavy objects on top of the printer.
Such objects may tip over or fall off, causing injuries.
If the printer is mounted on its dedicated stand, be sure to use the caster stoppers
to fix the stand in place and prevent it from moving while the printer is being used
If the stand is not fixed in place, the printer may tip over and cause injuries.
Avoid using the printer in the following locations.
Use in such locations may result in a fire hazard or electric shock.
·Excessively humid or dusty locations.
·Locations exposed to direct sunlight.
·Locations exposed to high temperatures.
·Locations near flames or moisture.
Use at the following places may result in malfunction or failure.
·Near equipment which generate a strong magnetic force or magnetic field.
Use this printer in places where the ambient temperature is between 20 to 28°C centigrade and humidity is
between 40 to 70%.
Leave plenty of space around the printer.
Leave sufficient space for operations around the printer.(rear and front about 2 meters, left and right about
3 meters)
ME ME ME ME Series Series Printer Printer Operation Operation Manual
Series Series Printer Printer Operation Operation
- 2 -
Manual
Manual Manual