Install Drier - Tektron ME901 Operation Manual

2.3.2 Install Printer
Install the printer body on leg stand
Note: As the printer is heavy, please use fork-lift to left the printer. Or two persons to do the procedure is
necessary.
With the help of fork-lift, put the printer on the stand and fix it by 4 pieces of M6X18 Hex screws in each side.
Please be sure that the fixing screw on the top of the leg is inserted in to the fixing hole in low beam of printer.
See the picture below.

2.4 Install Drier

WARNING
Two people required while install the drier.
2.4.1 Install Drier Bracket
Take the bracket from the packaging. Remove 4pcs of M8X14 Hex screws from each side of leg stand.
ME ME ME ME Series Series Printer Printer Operation Operation Manual
Series Series Printer Printer Operation Operation
- 19 -
Manual
Manual Manual