6.4 Structure And Description
1
2
3
Item #
Description
1
SET key
2
Shift key
3
Down key
4
Up key
5
SV Set Value
6
PV Presnt Value
Procedure :
Switch on heater power switch after turn on the main power switch of printer. The heater starts warming up.
The default control point is 40℃.
To adjust the control point ( for example, set to 50℃):
Step 1. Press SET,
ME ME ME ME Series
Series Printer
Printer Operation
Series
Series
Printer
Printer
4
5
Function
For Function change and confirm
This is used to change the digit that would be changed
This is used for reducing the count
This is used for increase count
This displays the temperature to be reached.
This displays the actual temperature measured.
- 64 -
Operation Manual
Manual
Operation
Operation
Manual
Manual
6