Tektron ME901 Operation Manual page 5

As a general rule, do not use additional power cables.
If you use additional cable, please make sure that total amperage of the equipment
connecting with cable shall not exceed the amperage of the power supply. Moreover,
the amperage of all equipment connecting with wall socket does not exceed the amperage of the wall
socket.
Make sure that the power plug can be readily unplugged at any time, and that
there are no objects placed in its vicinity.
Be sure to ground the earth terminal.
Avoid the socket in the same circuit with copy machine or air conditioner.
Avoid using the socket controlled by the wall switch or by automatic timer.
Put your computer system away from potential sources of electromagnetic interference.
Such as reproducers and cordless telephones.
Do not use damaged or attrited power cable.
Handling precautions
WARNING
Do not disassemble or modify printer.
If the printer makes an unusual noise, generates smoke, overheats, emits a strange odor, or otherwise
functions abnormally, immediately turn off the power, remove the plug from the power outlet, and either
contact the store where you purchased your printer or your nearest Graphtec representative.
Do not use flammable aerosols or similar products in the vicinity of the printer.
Before moving the printer, make sure that the power switch is in the "off" position
and that the power plug has been removed from the power outlet.
Use power switch to close your printer. If the power switch is in the "off" position,
power will be cut off. Before cut off the power, do not pull out the printer plug and
data lines.
Before moving the printer, make sure that the print heads are fixed on the original
locations
Do not touch any metallic parts on the print heads after a printing operation.
ME ME ME ME Series Series Printer Printer Operation Operation Manual
Series Series Printer Printer Operation Operation
- 4 -
Manual
Manual Manual