Tektron ME901 Operation Manual page 36

Auto_Clean
Vacuum_Mode
Head_Qty
LCD_Cntrst
Syetem_Set
Language
Media_detect
Cutter_Enabl
ME ME ME ME Series Series Printer Printer Operation Operation Manual
Series Series Printer Printer Operation Operation
For water base ink, 3 is recommended.
For Eco-solvent ink, 5 is recommended.
This is the function to keep nozzle wet by periodic jetting process during
printing. All nozzles will jet while head pass through the purging pad in
clean station after certain passes.
Lighten this item, press OK to confirm. Use Left or Right key to change the
value.
1：indicates all nozzles are purged after 36 passes.
9：indicates all nozzles are purged every pass.
The default value is 0 (Disable).
Lighten this item, press OK to confirm. Use Left or Right key to change the
vacuum mode.
1：Auto: the vacuum is controlled by the system. The vacuum is generated
with printing starts. The vacuum is off if there is no printing task existed.
2：Enabl: The vacuum is generated while the printer is on.
3：Disab: There is always no vacuum on the platen.
Lighten this item, press OK to confirm. Use Left or Right key to choose the
head number.
"1" indicates that
"2" indicates that two head are used.
The default number is 1.
Lighten this item, press OK to confirm. Use Left or Right key to change LCD
display contrast
Press Left key, the display background will be more dark
Press Right key, the display background will be more bright
Lighten this item, press OK to confirm. Use Left or Right key to select
language.
The default language is Chinese.
Lighten this item, press OK to confirm. Use Left or Right key to enable or
disable..
The default is Disable
This is the function to cut off the media while finish printing task. ( it is not
available for this model)
Lighten this item, press OK to confirm. Use Up or Down key to enable or
disable the cutter.
The default is Disable.
- 35 -
Manual
Manual Manual
one head is used.