Tektron ME901 Operation Manual page 27

2.7.3 Connect the injector with the damper, draw the ink out from the cartridge into the damper.
Note: the ink level in the damper should be not less than 50%, otherwise it will cause ink
interrupted during printing.
2.7.4 Connect each damper to individual ink inlet on print head
Note: please make sure the color order should be in correct: K,K,C,C,,Y,Y,M,M. from left to right.
ME ME ME ME Series Series Printer Printer Operation Operation Manual
Series Series Printer Printer Operation Operation
- 26 -
Manual
Manual Manual