Cut-Out Mark Dimensions - CAB A+ Operator's Manual

8 Media
8.4

Cut-out Mark Dimensions

for marginal cut-out marks
minimum liner thickness 0,06 mm
Fig. 22 Cut-out mark dimensions
Dim. Designation
A Label distance
N Width of cut-out mark
P Height of cut-out mark
X Distance mark - material edge
Y Sensor recognized virtual label front edge with gap sensor recognition
Z Distance recognized front edge - actual label front edge
 Adjust software settings
Table 11 Cut-out mark dimensions
Marginal cut-out
Fig. 23 Samples for cut-out marks
Labels with cut-out marks
for marginal cut-out
for A2+
for A4+, A4.3+, A6+, A8+
Long hole cut-out
Endless material with cut-out marks
Rectangular cut-out Circular cut-out
Not recommended !
33
Dim. in mm
> 2
> 5
> 8
2 - 10
5 - 26
5 - 53
Rear edge cut-out
0 up to A-P
Cut-out
between the labels
Not recommended !