Clearing Paper Jams - iSys iTerra Elite ll User Manual

Error
Status: Error 00
Status: Error 01
Status: Error 02
Status: Error 03
Status: Error 10
Status: Error 11
Status: Error 31
Status: Error 32

Clearing Paper Jams

STEP 1
Press the cover release and open the top cover.
WARNING: If the printer has been powered on, the fuser will
be hot. This area is clearly labeled. Do not touch.
June 2011: Revision 002
What Happened
Emergency stop (guide door opened during motor
movement)
Switch panel communication error
Internal error
Internal error
Media not found over lower load sensor after load
Media not positioned between load sensors
properly after load advance
Cutter did not leave home position in required time
Cutter did not finish cut in required time or can't
home it
STEP 2
Note the position of the four toners cartridges (a) and image
drums (b). It is essential that they go back in the same
order.
29