Security; Save & Exit - Nexcom NEX 605 User Manual

Chapter 3: System Setup

Security

Administrator Password
Select this to reconfigure the administrator's password.
User Password
Select this to reconfigure the user's password.
Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved
Save & Exit
Save Changes and Reset
To save the changes and exit the Setup utility, select this field then press
<Enter>. A dialog box will appear. Confirm by selecting Yes. You can also
press <F4> to save and exit Setup.
Discard Changes and Reset
To exit the Setup utility without saving the changes, select this field then
press <Enter>. You may be prompted to confirm again before exiting. You
can also press <ESC> to exit without saving the changes.
Restore Defaults
To restore the BIOS to default settings, select this field then press <Enter>.
A dialog box will appear. Confirm by selecting Yes.
44
NEX 605 User Manual