Table of Contents
Advertisement
E
Important
Read and follow all instructions and Safety Precautions before using this equipment
The Compact Gravity feed Spraygun Kit complies to ATEX regulations 94/9/EC, protection level;
II 2 G X, Suitable for use in Zones 1 and 2
Important: : These Sprayguns are suitable for use with solvent based materials. These guns are not
designed for use with highly corrosive and/or abrasive materials and if used with such materials it must
be expected that the need for cleaning and/or replacement of parts will be increased. If there is any
doubt regarding the suitability of a specific material contact your local Distributor or ITW Finishing direct.
.
Example:
Aircap
EC Declaration of Conformity
We, ITW Finishing UK, Ringwood Rd, Bournemouth, Dorset, BH11 9LH, UK, as the
manufacturer of the Spray gun model Compact, declare, under our sole responsibility, that the
equipment to which this document relates is in conformity with the following standards or other
normative documents:
BS EN 292-1 PARTS 1 & 2: 1991, BS EN 1953: 1999; and thereby conform to the
protection requirements of Council Directive 98/37/EEC relating to Machinery Safety Directive,
and: EN 13463-1:2001, council Directive 94/9/EC relating to Equipment and Protective
Systems intended for use in Potentially Explosive Atmospheres protection level II 2 G X.
For HVLP and Trans-Tech Aircaps these products comply with the requirements of the EPA
guidelines, PG6/34,PG6/20 and PG6/23 achieving transfer efficiency in excess of 65%.
ITW Finishing Systems and Products reserve the right to modify equipment specification without prior
notice.
Operation Manual
COMPACT – Gravity Feed Spraygun
Description
Model Part Number
COM-G430-16
B. Holt, General Manager
th
30
June 2003
2
Fluid Nozzle size
(14 = 1.4 mm)
© 2003 ITW Finishing Systems and Products
Advertisement
Table of Contents
