Ec Declaration Of Conformity; Part Numbers; Operational Description - DeVilbiss GTI PRO LITE Operation Manual

EC Declaration of Conformity

We, Finishing Brands UK Limited, Ringwood Rd, Bournemouth, Dorset, BH11 9LH, UK,
as the manufacturer of the Spray gun model GTIPRO LITE G, declare, under our sole
responsibility, that the equipment to which this document relates is in conformity with
the following standards or other normative documents:
BS EN ISO 12100: 2010, BS EN 1953:2013; and thereby conform to the protection
requirements of Council Directive 2006/42/EC relating to Machinery Safety Directive, and;
EN 13463-1:2009, council Directive 94/9/EC relating to Equipment and Protective Systems
intended for use in Potentially Explosive Atmospheres protection level II 2 G X.
Finishing Brands UK Limited reserves the right to modify equipment specification without prior notice.

Part Numbers

The ordering code for the GTIPRO LITE G Spray gun is;

Operational Description

This GTIPRO LITE G Spray Gun is a professional quality gun designed with both high volume,
low pressure (HVLP) technology or High Efficiency EPA compliant technology. HVLP
Technology reduces overspray and limits air cap pressure to 0.7 bar (10 psi). High Efficiency
complies with EPA by obtaining transfer efficiency above 65%.
IMPORTANT: These Sprayguns are suitable for use with both waterbased and solvent based
coating materials. These guns are not designed for use with highly corrosive and/or abrasive
materials and if used with such materials it must be expected that the need for cleaning and/or
replacement of parts will be increased. If there is any doubt regarding the suitability of a specific
material, contact your DeVilbiss Distributor or DeVilbiss direct.
NOTE: This gun is not to be used with halogenated hydrocarbon solvents or cleaning agents
such as 1,1,1,-Trichloroethane or methylene chloride. These solvents can react with the
aluminium components used in this gun and cup. The reaction can become violent and lead to
an equipment explosion.
D. Smith, Director of Sales (EMEA)
E.g. PROLT-GTE10-12 where;
G = Gravity Gun
TE10 = TE10 Aircap
12 = 1.2 Nozzle
See charts 1 & 2 p13 for available Aircap/Nozzle sizes
5th May 2016
3