Characteristics; Ec Declaration Of Conformity - DeVilbiss COBRA 3C Operation Manual

Automatic spray gun

Table of Contents

Manual Operation

Cobra 3C Automatic Spray gun

Important - Read and follow all instructions and Safety Precautions

before using this equipment.

CHARACTERISTICS:

 This automatic spray gun complies with ATEX regulations 94/9/EC, protection

level II 2 G X T6, suitable to use in zones 1&2.

 This Cobra 3 is a production spray gun suitable for use with automatic and

semi-automatic machines in HVLP or Trans-Tech applications.

 Remotely positioned valves (supplied by user) control all air supplies for

atomisation, fan size and triggering.

 To handle a wide range of coating materials this spray gun is made from high

grade stainless steel.

IMPORTANT: These Spray guns are suitable for use with both water based

and solvent based coating materials. These guns are not designed for use

with highly corrosive and/or abrasive materials and if used with such materials

it must be expected that the need for cleaning and/or replacement of parts will

be increased. If there is any doubt regarding the suitability of a specific

material, contact your DeVilbiss Distributor or DeVilbiss direct. NOTE: This

gun is not to be used with halogenated hydrocarbon solvents or cleaning

agents such as 1, 1, 1,-Trichloroethane or methylene chloride. These solvents

can react with the aluminium components used in this gun. The reaction can

become violent and lead to an equipment explosion.

 Fluid Tips and Needles are only available in hardened stainless steel.

 Pressure feed material supply can be re-circulated or direct.

 The needle adjustment knob has a micrometer control allowing fine and

accurate fluid flow control.

We, Finishing Brands UK Limited, Ringwood Rd, Bournemouth, Dorset, BH11 9LH, UK as

the manufacturer of the spray gun model Cobra 3C, declare, under our sole responsibility that

the equipment to which this document relates is in conformity with the following standards or