UB335ZH.book Page 83 Friday, March 17, 2006 4:35 PM
Auto — the scanner automatically adjusts the digital decode threshold to match
the transmission you are hearing when it receives a strong signal and has a high
decode rate.
Manual — lets you manually adjust the digital decode threshold. To manually
adjust the P25 level, select Manual.
Default — sets the digital decode threshold to the default value. Use this setting
to return to the value that usually provides adequate performance. This is handy is
you have manually adjusted the value to a setting that prevents proper decoding.
Note: This setting has no effect on how these sites are received.
Deleting Sites
[MENU]
Program System
Select a trunked system
Edit Site
Select a site
Delete Site
Confirm Delete?
Yes="E" / No= "."
Important: Deleted sites cannot be restored. You must re-enter them.
Programming Channel Groups
Setting Up a Channel Group
[MENU]
Program System
Select a system
Edit Group
New Group
The scanner creates a group with a default name of Group n. n increments by
one for each new group you create within a system.
Editing a Channel Group Name
[MENU]
Program System
Select a system
Edit Group
Select a Group
Edit Name
MECL
Programming Your Scanner
ME
MECL
MECL
83