Manual Mice Synchronization - Minicom Smart IP Access User Manual

Note! If the mouse settings on the Target Server were ever changed, you must
synchronize mouse pointers manually, as explained below.

24.9.3 Manual mice synchronization

If the mouse settings on the Target Server were ever changed, or when the
Operating system on the Target Server is, Windows XP / 2003 Server / Vista,
Linux, Novell, SCO UNIX or SUN Solaris you must synchronize the mouse
pointers manually.
To manually synchronize mouse pointers:
1. From the Toolbar click
appears see Figure 24.
2. Select the Target Server's Operating System and click OK. Instructions and
sliders appear.
3. Follow the instructions and set any relevant sliders to the same values as set in
the Target Server's Mouse Properties window.
2 examples!
For Windows XP, go to the Mouse settings on the Target Server and uncheck
Enhance pointer precision.
For Windows NT4. If Mouse Properties were ever changed for the Target Server –
even if they have been returned to their original state - uncheck default -
Click OK. The mouse pointers should be synchronized.
SMART IP ACCESS
/ Manual Settings. The Mouse Settings box
Figure 24 Mouse Settings box
29
.