Administrator; User; View Only; Adding A User - Minicom Smart IP Access User Manual

14.1 Administrator

An Administrator has unrestricted access to all windows and settings and can "take
over" any active session. An Administrator can change the name and password of
all users.

14.2 User

A User has no access to the Web configuration interface. When accessing a Target
Server a User cannot use the following:
·
Advanced mouse settings
·
Power cycle

14.3 View only

View only can view the screen of any Target Server without keyboard and mouse
control. Only limited options appear such as switching Servers and Disconnect
(Explained on pages23 and 31). A "view only" indicator appears on the viewer's
local mouse pointer.

14.4 Adding a user

To add a user:
1. Click
least 6 characters – letters or numbers, and must not include the user name, even
if other characters are added.
Note! The following "special" characters: &, <, >, ", {, } cannot be used for
either the user name or password.
Depending on the security level chosen the user name and password parameters are
different. See section 17 on page 17.
2. Select the permission type from the Permission box.
3. Click
USER GUIDE
and type a name and a password. The password must be at
, the user appears in the list of users.
14