Saving Changes And Logging Out; Starting A Remote Session - Minicom Smart IP Access User Manual

SMART IP ACCESS
Figure 17 Restore factory settings
2. Click

23. Saving changes and logging out

To save any configuration changes and restart the IP Access click .
To exit the configuration menu and close the session click .
Only one Administrator can log into the configuration area at a time. An idle
timeout of 30 minutes terminates the session.

24. Starting a remote session

At a Client computer open Internet Explorer (6.0 and above) and type the Smart IP
Access's IP address. https://IP address. The Login box appears. Type your
username and password and press Enter. By default, the user name is: admin and
the password is access, (both lower case).
On first connection install the Minicom certificate and ActiveX control.
The screen of the Target Server connected directly to Smart IP Access, or the
currently selected server on the KVM switch with Smart IP Access toolbar appears
see Figure 18.
21