Editing A User; Deleting A User; Blocking A User; Administration > Switch Configuration - Minicom Smart IP Access User Manual

14.5 Editing a user

To edit a user:
1. Select the user from the list.
2. Click
permission and password.
3. Click

14.6 Deleting a user

To delete a user:
1. Select the user from the list.
2. Click
3. Click

14.7 Blocking a user

An alternative to deleting a user is blocking a user. This means that the user's name
and password is stored, but the user is unable to access the system. Check Block to
block a user. Uncheck Block to allow the user access.
15. Administration > Switch configuration
When a KVM switch is connected to the system, you must configure the switch in
the system.
To do so:
1. From the menu click Switch Configuration. The KVM Switch Configuration
window appear, see Figure 10.
SMART IP ACCESS
. You can now change all the parameters – user name,
, the changes are saved.
.
, the changes are saved.
15