Logging Into The Web Interface - Minicom Smart IP Access User Manual

LAN connector cable to the Smart IP Access on one end, and to the Ethernet
adapter of your computer at the other end.

11. Logging into the Web interface

To complete the initial setup via the Web configuration interface:
1. Open your Web browser (Internet Explorer version 6.0 or higher)
2. Type the IP address of the Smart IP Access system - https://IP address/config
and press Enter. The login page appears, see Figure 6
3. Type the Administrator user name and password. By default, the user name is:
admin and the password is access (both lower case).
4. Press Enter. The Web interface opens at the Network Configuration page. See
Figure 7.
5. Bookmark the page for easy reference.
USER GUIDE
Figure 6 Login page
10