Dpmr Operation; Receiving A Call - Icom IC-F5122D Operating Manual

2

dPMR OPERATION

■ dPMR operation
The IC-F5122D and IC-F6122D provide digital Private Mobile
Radio (dPMR) operation that meets the 6.25 kHz bandwidth
requirements for narrow band operation. This increases ef-
ficiency of channel allocation and use of the spectrum.

■ Receiving a call

D Receiving an Individual call
q When an Individual call is received:
• Beeps sound.
• " " appears and the mute is released.
• " " appears or blinks, depending on the preprogrammed set-
tings.
• The calling station's ID (or name) blinks.
The calling station
ID name
w While holding down [PTT], speak into the microphone at
your normal voice level.
e Release [PTT] to receive.
3 3
D Receiving a Group call
q When a Group call is received:
• Mute is released.
• While receiving the signal, either the calling station or Talkgroup
ID name (or code) can be displayed, depending on the prepro-
gramming.
• When an All Call is received, "ALL CALL" is displayed.
The calling station or
Talkgroup ID name
w While holding down [PTT], speak into the microphone at
your normal voice level.
NOTE: Only one station is allowed to speak at the
same time.
e Release [PTT] to receive.
Continued on the next page