Icom IC-F5122D Operating Manual page 5

D dPMR operations
The following key functions are useful for the dPMR opera-
tion.
STATUS UP, STATUS DOWN
➥ Push to select a status message.
➥ When the automatic scroll function is activated, push to
cancel it, if desired.
➥ When an SDM that includes more than 8 characters is dis-
played, push to manually scroll the message.
STATUS
➥ Push to enter the status message selection mode.
• Push [CH Up] or [CH Down] to select a desired message.
➥ Hold down for 1 second to transmit the last selected status
message.
MESSAGE
➥ Push to enter the SDM selection mode.
• Push [CH Up] or [CH Down] to select a desired SDM.
➥ While in the SDM selection mode, hold down for 1 second
to transmit the last selected SDM.
D Additional key functions
• dPMR operations
The following key functions are recommended for the dPMR
operation, and function as described below.
CALL
On a digital channel, push to transmit a dPMR call.
Depending on the preprogrammed settings, pushing [PTT]
makes a call in the same way as using [Call]. Moreover,
when you keep holding down [PTT] after receiving an ac-
knowledgement, you can start a conversation without
pushing it again.
TX CODE ENTER
Push to enter the ID code edit mode, and then set a desired
ID code. (p. 7)
MONITOR (AUDIBLE)
After communication is finished, push this key to send a 'Clear
down' signal to terminate the connection.
Depending on the preprogrammed settings, the Priority A
channel is automatically selected after a 'Clear down' sig-
nal terminates a connection.
1
PREPARATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
2