Transmitting A Call - Icom IC-F5122D Operating Manual

2
dPMR OPERATION

■ Transmitting a call

dPMR operation allows you to make a call to a specific station
(Individual call) or to a specific group (Talkgroup call). Other
digital mode transceivers on the channel will not hear a call
that does not match their Individual or Talkgroup ID.
D Transmitting a Voice Call
q Push [dPMR Button] to enter the ID selection mode.
• The preprogrammed ID name is displayed.
• When an ID name is not programmed, ID code is displayed.
• The primary ID can be preset to display first.
w Push [CH Up] or [CH Down] to select a desired Individual
ID or Talkgroup ID.
• The IDs can be edited within the allowable digits. See the column
to the right for details.
* This illustration shows an Individual type call.
e Hold down [PTT], then speak into the microphone.
r Release [PTT] to receive.
7
• Editing an ID
If the transceiver has a key assigned to the TX Code Enter
function, you can edit an ID within the allowable digits.
q Push [TX Code Enter] to enter the ID edit mode.
• The digit to be edited blinks.
w Push [TX Code Enter] to select a desired digit to be ed-
ited.
e Push [CH Up] or [CH Down] to select a desired
number.
r Push [TX Code Enter] to set. The digit to the right will
automatically blink.
t Repeat step e and r to input all allowable digits.
y After editing, push [TX Code Enter] to store the set-
ting.
• The transceiver returns to the stand-by mode.
NOTE:
Changing the channel or turning OFF the transceiver
discards the new ID, and returns the original one.