Preparation; Programmable Function Keys - Icom IC-F5122D Operating Manual

1

PREPARATION

■ Programmable function keys

The following functions can be assigned to [UP], [DOWN],
[P0], [P1], [P2] and [P3] programmable function keys.
Consult your Icom dealer or system operator for details con-
cerning your transceiver's programming.
If the programmable function names are bracketed in the fol-
lowing explanations, the specific key is used to activate the
function.
1
D For dPMR operation
The following key functions are required for the operation.
dPMR BUTTON
➥ Push to enter the ID selection mode.
• Push [CH Up] or [CH Down] to select a desired Individual or
Talkgroup ID.
➥ While in the ID selection mode, push to enter the application
selection mode.
• Push [CH Up] or [CH Down] to select a desired application from
"STAT," and "MSG."
➥ Push to enter the message selection mode.
• Push [CH Up] or [CH Down] to select a desired message.
➥ While in the application selection mode, push to return to
the stand-by mode.
CLEAR
After communication is finished, push this key to send a 'Dis-
connect' signal to terminate the connection.
Depending on the preprogrammed settings, the Priority A
channel is automatically selected after a 'Disconnect' sig-
nal terminates a connection.