Icom IC-F5122D Operating Manual page 11

D Transmitting an SDM
You can send a preprogrammed SDM to an individual sta-
tion or to group stations. The transceiver has 10 memories
to store messages.
q Push [dPMR Button] to enter the ID selection mode.
• The preprogrammed ID is displayed.
w Push [CH Up] or [CH Down] to select a desired Individual
ID or Talkgroup ID.
• The IDs can be edited within the allowable digits. See page 7 for
details.
e Push [dPMR Button] again to enter the application selec-
tion mode.
• "STAT" is displayed.
r Push [CH Up] or [CH Down] to select "MSG."
t Push [dPMR Button] again to enter the SDM selection
mode.
• The preprogrammed SDM is displayed.
y Push [CH Up] or [CH Down] to select a desired SDM.
u Push [Call] to transmit the SDM to the selected station or
talkgroup.
• "WAIT" is displayed while transmitting.
• "OK" is displayed when an acknowledgement is received.
• "FAILED" is displayed when no acknowledgment is received.
i After a specified time period, the transceiver will return to
the stand-by mode.
D Transmitting an Emergency Call
When [Emergency] (described in the instruction manual) is held
down for the specified time period, the emergency signal is trans-
mitted once or repeatedly* on the emergency channel. When no
emergency channel is specified, the signal is transmitted on the
operating channel.
* When the Repeat Cancel function is ON, the transceiver cancels
repeat calling after receiving an acknowledgement.
When the Repeat Cancel function is OFF, the transceiver continues
to call according to the number of repeat cycles, even after receiv-
ing an acknowledgement.
Individual or Talkgroup call types of emergency calls can be
preset. If the call type is not preset, the default or selected
call type is used.
If you want to cancel the emergency call, hold down
[Emergency] again before transmitting the call.
The emergency call can be transmitted without sounding
beeps or changing the LCD display, depending on the pre-
programming. (Silent operation)
The transceiver can also be programmed to keep the micro-
phone open during an emergency call, allowing other stations
to monitor the situation.
Ask your dealer for details.
2
dPMR OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
8