Table of Contents
Advertisement
Touchscreen. To clean the touchscreen, follow these steps:
1. Press the power button briefl y to suspend the device.
2. If you applied a protector to the touchscreen, carefully
remove it.
3. Apply water or a mild cleaning solution such as
®
or
409
to a microfi ber cloth and gently wipe off the
touchscreen. Other approved cleaners include
Wonder
!
CAUTION: Do not use tissues, paper towels, or harsh
cleaning agents to clean the touchscreen.
4. If you used a cleaning solution, rinse the touchscreen
with water and dry it with a microfi ber cloth.
5. Press the power button to resume the device.
!
CAUTION: Long exposure to the following solutions may
damage your device:
•
pine oil
•
oil based paint
•
automotive brake cleaner
•
isopropyl alcohol
•
carburetor cleaner
In case the device is exposed to one of these solutions, wipe
it off with a mild cleaning solution.
Case o vermolding. Clean the rubber-like overmolding that
surrounds the case with a cloth and a mild cleaning solution
like
409
or
Citrus
the device with water.
Communications module (area housing the USB port, DC
jack, serial port). To clean the communications module, run it
under a faucet. Use a soft toothbrush or toothpick to clean out
any remaining dirt.
Speaker and microphone. If debris gets in the speaker or
microphone, use a soft bristle brush to remove it. Do not
92
®
and
Citrus All Purpose Cleaner
Wonder. After you are done cleaning, rinse
Windex
Citrus
®
.
®
Advertisement
Table of Contents
