Table of Contents
Advertisement
Chapter 2
Getting Started
This chapter repeats—with a few more details—the
installation instructions that came in the Quick Start Guide
and User Manual.
Step 1: Install the
battery pack
1. Carefully unhook and lift up the bottom
hook of the hand strap, as shown in the
fi rst picture.
!
WARNING! Releasing the hand strap hook
too quickly may result in injury or damage to
the display. Use caution when undoing the
hook or when holding the Field PC by its hand
strap.
2. Press on the battery door and slide the
door latch to the right to unlock it, as
shown in the second picture.
3. Remove the battery door.
4. Insert the battery pack so battery contacts
match up.
5. Insert the tabs on the bottom of the
battery door into the case slots. Close the
battery door.
6. Press on the battery door. Slide the latch
to the left to lock it.
7. Reattach the hand strap.
8
Advertisement
Table of Contents
