Table of Contents
Advertisement
Powering off the Field PC. Powering off the device ends all
programs and removes power from all system components
except for the real-time clock. Unlike suspend mode, the
device resets when it is powered on again.
To preserve battery power, we recommend you power off the
device if it will be left unused for two weeks or longer.
To power off the Field PC,
1. Save your open fi les and close any running programs.
(For instructions on backing up fi les, see Backing up data
in Chapter 5.)
2. Press the Power button until the Power Button menu
appears, as shown here.
Note: The device cannot be powered off while it is plugged
into the wall charger.
3. Tap Power Off . A warning dialog appears, as shown in the
second picture. Tap OK.
Note: The keyboard backlight
stays on for a few seconds after
the device shuts off . The device
cannot be powered back on until
the keyboard backlight turns off .
To power on your Field PC, hold down the Power button until
you see the green notifi cation light appear.
Resetting the device.
your device during the installation process. Follow the steps
below to reset the Field PC:
1. Save your open fi les and close any running programs.
(For instructions on backing up fi les, see Backing up data
in Chapter 5.)
2. Press the Power button until the Power Button
menu appears.
3. Choose Reset.
18
Some programs require you to reset
th th P P
b b tt tt
t t il il
Advertisement
Table of Contents
