CipherLab CP60G Reference Manual page 26

CP60 Mobile Computer (CE)
DIRECT CHARGING USING SNAP-ON CABLE
Direct charging of the mobile computer relies on the Snap-on Charging & Communication
Cable (hereinafter "snap-on cable"). There is a power jack on the connector of this cable to
connect external power.
Prior to charging, install the main battery as described in
the steps below:
1) Attach the snap-on cable to the mobile computer.
2) Plug the head of the power adapter cord into the power jack located on snap-on cable's
connector.
3) Connect the power adapter to a power outlet.
To output data to your PC or laptop, connect the snap-on cable (either through USB or
RS-232 connection) to it. See
Figure 5: Direct Charging Using Snap-on Cable
14
Direct Data Communication
When data
transmission is
required.
Reference Manual
Main Battery Setup. Then follow
for follow-ups.