CipherLab CP60G Reference Manual page 227

Length option
Interleaved 25
Interleaved 25
Length option
Verify Check Digit
Transmit Check Digit
Convert To EAN-13
GS1 DATABAR
GS1 DataBar-14
Enable GS1 DataBar-14 Checkbox to enable GS1 DataBar-14 decoding.
GS1 DataBar Limited
Enable GS1 DataBar
Limited
GS1 DataBar Expanded
Enable GS1 DataBar
Expanded
Convert to UPC/EAN
Sets the length of the Code 39 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Checkbox to enable Interleaved 2 of 5 decoding.
Sets the length of the Code 39 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Decide whether to verify the check digit. If desired, select
one of the algorithms below. If the check digit is incorrect,
the barcode will not be accepted.
Disable
USS Check Digit
OPCC Check Digit
Decide whether to include the check digit in the data being
transmitted.
Convert a 14-character Interleaved 25 barcode into EAN-13
if the following requirements are met:
The barcode must have a leading 0 and a valid EAN-13 check
digit.
Checkbox to enable GS1 DataBar Limited decoding.
Checkbox to enable GS1 DataBar Expanded decoding.
Appendix II Laser (SE955 & SE965HP)
Max / Min
Length
(4-55)
Enable
Max / Min
Length
(4-55)
Disable
Disable
Disable
Enable
Enable
Enable
215